2

STEP 2 Install Brock PaverBase Panels

Starting against a straight edge of the patio or walk, lay the Brock panels, ensuring that the side flanges overlap. Ideally, lay them in a “brick-like” pattern (illustration below). This will ensure stability of the panels when you lay the PaverTurf. Trim along edges using a razor knife. Place any extra scrap pieces of Brock PaverBase in your recycling bin. For more info please visit-  http://www.brockpaverbase.com/paver-base-concrete-installation/

install-Brock.png

Make sure the side flanges overlap. 

Congratulations you now have a base that is ready for PaverTurf!

   

(PaverTurf Grids need to be glued down to Brock PaverBase panels when installed over concrete) 

Back To STEP 1